INPEX Masela, Ltd. is Japanese Oil and Gas Company and working in Indonesia as Production Sharing Contractor (PSC) for BPMIGAS.
To support our Masela Project, INPEX Masela, Ltd. is looking for
PROCUREMENT STAFF
who meets the following criteria:
• More than 3 years experience working for Procurement in PSC (Preparation of Tender Document, Evaluation, Contract Negotiation, Reporting to BPMigas etc)
• Understand BPMIGAS Procurement procedure (PTK007, Pedoman Tata Kerja) and local content
• General PC skills, MS Excel, Word and PowerPoint
• Fluent speaking and writing English
Those who are fully met with above criteria, please send an application letter with updated C.V. before 10th of October 2008, by e-mail to: tempjkt4@inpex.co.jp or by mail to below address.
INPEX Masela, Ltd.
Mid Plaza I, 7th Floor
Jl. Jenderal Sudirman, Kav 10-11,
Jakarta 10220
Attn.: Operations Department
Please write down “Procurement Staff” in the upper left corner of the envelope. All application will be kept strictly confidential.
Saturday, September 27, 2008
BAKER HUGHES
Baker Hughes is a leading Oil & Gas and services organization. We operate in 90 countries worldwide with over 35,000 employees. We create value for Oil & Gas companies by offering leading drilling, formation evaluation, completion and production products and services. We are now seeking to recruit highly motivated “Mechanics” for our Baker Atlas Division in Indonesia.
Mechanic (Requisition ID: 7887)
The jobholder would repair, test, diagnose and maintain machinery, mechanical and hydraulic equipment such as diesel engines, motors, and air compressors; conduct regular inspections at both onshore and offshore locations as part of preventative maintenance program and equipment; maintain equipment records and fifing systems as part of quality control and assurance programs. In addition, the jobholder would ensure training certification is current; stop job on location or at district when unsafe conditions are observed; post warning signs and barriers at district or well site as required; understand and comply with safety practices and procedures for operational tasks (pressure, lifting certifications); drive safely to and from location; operate Crane - practice safe winching. The jobholder would have exposure to Heavy Diesel Engine, Hydraulic system, Pneumatic and Electrical system
In order to be considered, you should be holding a D3 Polytechnic degree in Mechanical Engineering with good understanding and command in English, written and oral.
To find out more, visit www.bekerhughes.com/careerportal and search for the job by the “Requisition ID” or by Country. Alternatively, you can send your CV to HR.Indonesia@Bakerhughes.com
CLOSING DATE: 2 weeks from the advertisement date.
Only shortlisted candidates will be contacted.
At Baker Hughes, there are no limits to what you can achieve.
Mechanic (Requisition ID: 7887)
The jobholder would repair, test, diagnose and maintain machinery, mechanical and hydraulic equipment such as diesel engines, motors, and air compressors; conduct regular inspections at both onshore and offshore locations as part of preventative maintenance program and equipment; maintain equipment records and fifing systems as part of quality control and assurance programs. In addition, the jobholder would ensure training certification is current; stop job on location or at district when unsafe conditions are observed; post warning signs and barriers at district or well site as required; understand and comply with safety practices and procedures for operational tasks (pressure, lifting certifications); drive safely to and from location; operate Crane - practice safe winching. The jobholder would have exposure to Heavy Diesel Engine, Hydraulic system, Pneumatic and Electrical system
In order to be considered, you should be holding a D3 Polytechnic degree in Mechanical Engineering with good understanding and command in English, written and oral.
To find out more, visit www.bekerhughes.com/careerportal and search for the job by the “Requisition ID” or by Country. Alternatively, you can send your CV to HR.Indonesia@Bakerhughes.com
CLOSING DATE: 2 weeks from the advertisement date.
Only shortlisted candidates will be contacted.
At Baker Hughes, there are no limits to what you can achieve.
Wednesday, September 24, 2008
ORPC
Oman Refineries and Petrochemicals Company LLC
After the oil was discovered in commercial quantities, Oman came into its own as an oil refining nation with the inauguration of the Mina Al Fahal Refinery in 1982 as the sole supplier of fuel in the country, under the patronage of His Majesty the Sultan.
Oman entered a new era in the oil refining business with the inception of the first refinery at the Mina Al Fahal area in Muscat. Following its sustained success, the Sohar Refinery Company was inaugurated in 2007. In a significant step towards providing unity of direction and a common set of targets, the merger of the two refineries has taken place to form the ‘Oman Refineries and Petrochemicals Company LLC’.
Today, known as ORPC, we remain one of Oman’s key industries.
Find your career here
ORPC Careers, please register before apply
After the oil was discovered in commercial quantities, Oman came into its own as an oil refining nation with the inauguration of the Mina Al Fahal Refinery in 1982 as the sole supplier of fuel in the country, under the patronage of His Majesty the Sultan.
Oman entered a new era in the oil refining business with the inception of the first refinery at the Mina Al Fahal area in Muscat. Following its sustained success, the Sohar Refinery Company was inaugurated in 2007. In a significant step towards providing unity of direction and a common set of targets, the merger of the two refineries has taken place to form the ‘Oman Refineries and Petrochemicals Company LLC’.
Today, known as ORPC, we remain one of Oman’s key industries.
Find your career here
ORPC Careers, please register before apply
Sunday, September 21, 2008
ARABIAN DRILLING CO.
SAUDI ARABIA
A leading Oil/Gas Drilling Company urgently requires the following personnel for their expanding Land & Offshore Operations
Rig Manager, Barge Captain, Mate,
QHSE Manager, Rig Superintendent,
Assistant Rig Superintendent,
Driller, Asst. Driller, Chief Mechanic,
Chief Electrician, Electronic Technician,
Cyber Driller, Safety Officer, Store keeper,
Rig Medic, Technical Drilling Instructor, Well Control
Training Instructor, Training Manager
The experience should be on Offshore
Jackup / Land Rigs
(Minimum 5 years experience in similar position)
The applicants must have minimum
High /Technical school
Education, Fluent in English.
(GOOD TERMS & CONDITIONS)
Free Food, Accommodation, Medical & Air Tickets, Insurance,
Long Term employment
Those with the requisite Qualification & Experience
may immediately forward their bio-data, 2 photos, copies of
certificates and passport to:
Arabian Drilling Company
P.O.Box: 4110-Al Khobar 31952
Kingdom of Saudi Arabia
Tel: 00-966-3-3301152 Fax: 00-966-3-3300624
Email: jobs-adc@al-khobar.oilfield.slb.com
A leading Oil/Gas Drilling Company urgently requires the following personnel for their expanding Land & Offshore Operations
Rig Manager, Barge Captain, Mate,
QHSE Manager, Rig Superintendent,
Assistant Rig Superintendent,
Driller, Asst. Driller, Chief Mechanic,
Chief Electrician, Electronic Technician,
Cyber Driller, Safety Officer, Store keeper,
Rig Medic, Technical Drilling Instructor, Well Control
Training Instructor, Training Manager
The experience should be on Offshore
Jackup / Land Rigs
(Minimum 5 years experience in similar position)
The applicants must have minimum
High /Technical school
Education, Fluent in English.
(GOOD TERMS & CONDITIONS)
Free Food, Accommodation, Medical & Air Tickets, Insurance,
Long Term employment
Those with the requisite Qualification & Experience
may immediately forward their bio-data, 2 photos, copies of
certificates and passport to:
Arabian Drilling Company
P.O.Box: 4110-Al Khobar 31952
Kingdom of Saudi Arabia
Tel: 00-966-3-3301152 Fax: 00-966-3-3300624
Email: jobs-adc@al-khobar.oilfield.slb.com
Friday, September 19, 2008
QATARGAS
WANT TO BE PART OF SOMETHING BIG?
WE ARE LOOKING FOR ENGINEER
Qatargas Operating Company has exciting opportunities available for qualified professionals to join our company in the development of the vast North Field in Qatar. Qatargas currently has under development over $20 billion worth of major projects, including the construction of four new Liquefied Natural Gas trains for the production and export of LNG to every coiner of the globe.
PLANT ENGINEERING
• Instrument and Control Systems Engineer
• Facilities Engineer APC Engineer
• Process Engineer (sulfur experience)
• Process Engineer (utilities)
• Piping Engineer
SAFETY, ENVIRONMENT AND QUALITY
• Loss Prevention Engineer
INTEGRITY AND RELIABILITY
• Plant Inspector
• Lead Reliability Engineer
• Inspection Engineer
RESERVOIR AND PRODUCTION ENGINEERING
• Production Performance Engineer
• Production Engineer
Qatargas offers a secure expatriate lifestyle in an international community with educational, medical and recreational facilities, competitive tax-free salaries, a full range of benefits, including family or bachelor housing, furnishings and generous paid annual vacation back to your country of origin.
Recruitment is being undertaken by Marsya Technology (748985-D) a specialised supplier or manpower to the oil and gas industry. Apply with JobTitle in the subject line, attaching a detailed CV, to:
qatargas@torfness.com
Marsya Technology Sdn.Bhd.
66-2,Jalan 2/23A Danau Kota,
53300 Setapak, Kuala Lumpur.
For information about Qatargas, the expatriate community, benefits and Qatar in general, visit www.qatargas.com
WE ARE LOOKING FOR ENGINEER
Qatargas Operating Company has exciting opportunities available for qualified professionals to join our company in the development of the vast North Field in Qatar. Qatargas currently has under development over $20 billion worth of major projects, including the construction of four new Liquefied Natural Gas trains for the production and export of LNG to every coiner of the globe.
PLANT ENGINEERING
• Instrument and Control Systems Engineer
• Facilities Engineer APC Engineer
• Process Engineer (sulfur experience)
• Process Engineer (utilities)
• Piping Engineer
SAFETY, ENVIRONMENT AND QUALITY
• Loss Prevention Engineer
INTEGRITY AND RELIABILITY
• Plant Inspector
• Lead Reliability Engineer
• Inspection Engineer
RESERVOIR AND PRODUCTION ENGINEERING
• Production Performance Engineer
• Production Engineer
Qatargas offers a secure expatriate lifestyle in an international community with educational, medical and recreational facilities, competitive tax-free salaries, a full range of benefits, including family or bachelor housing, furnishings and generous paid annual vacation back to your country of origin.
Recruitment is being undertaken by Marsya Technology (748985-D) a specialised supplier or manpower to the oil and gas industry. Apply with JobTitle in the subject line, attaching a detailed CV, to:
qatargas@torfness.com
Marsya Technology Sdn.Bhd.
66-2,Jalan 2/23A Danau Kota,
53300 Setapak, Kuala Lumpur.
For information about Qatargas, the expatriate community, benefits and Qatar in general, visit www.qatargas.com
Monday, September 15, 2008
EQUATE Petrochemical Company
Job Opportunities
Job Title :
Lab Technician
Department :
Manufacturing
Job Description :
Be responsible for analytical systems and Operating Discipline / Quality System. Perform routine, non-routine and complex analyses. Evaluate and apply new / improved analytical systems
Degree :
Bachelor Degree
Major:
Chemistry
Second Major:
Chemistry
Skills :
- Knowledge in ASTM, ISO and other international standards.
- Knowledge in quality management systems (ISO
– 9001 & 14001) and audit systems. - Knowledge in basic computer operation, LIMS and lab related software’s.
Experience :
- Minimum three years of experience in industrial Chemical/Petrochemical Laboratory (QA/QC) including experience in commissioning, start-up of Aromatics and/or Ethyl Benzene Styrene Monomer laboratory.
- Hands-on experience in handling analytical ins
Job Location :
Plant
Job :
Level Support
Click here for apply
Job Title :
Lab Technician
Department :
Manufacturing
Job Description :
Be responsible for analytical systems and Operating Discipline / Quality System. Perform routine, non-routine and complex analyses. Evaluate and apply new / improved analytical systems
Degree :
Bachelor Degree
Major:
Chemistry
Second Major:
Chemistry
Skills :
- Knowledge in ASTM, ISO and other international standards.
- Knowledge in quality management systems (ISO
– 9001 & 14001) and audit systems. - Knowledge in basic computer operation, LIMS and lab related software’s.
Experience :
- Minimum three years of experience in industrial Chemical/Petrochemical Laboratory (QA/QC) including experience in commissioning, start-up of Aromatics and/or Ethyl Benzene Styrene Monomer laboratory.
- Hands-on experience in handling analytical ins
Job Location :
Plant
Job :
Level Support
Click here for apply
KANGEAN ENERGY INDONESIA
CAREER OPPORTUNITY
We are one of the fastest growing oil & gas companies in Indonesia focusing in upstream oil and gas with a clear growth strategy, is looking for a highly qualified with good dedication professionals to fill the position as :
1. SENIOR RESERVOIR ENGINEER (CODE : SRRE)
Qualifications:
• Minimum University degree, major in Petroleum engineering (or any related discipline)
• Age between 30 - 45 years old
• Minimum of 6 - 10 years knowledge and have experience with the application of traditional and non-traditional reservoir engineering techniques including decline curve analysis, volumetric analysis, well test analysis, material balance, pressure transient analysis, economic and risk analysis and other aspects of reservoir engineering
• Familiar and able to run with Eclipse, PETEX, OFM software
2. FACILITY ENGINEER (CODE : FENG)
Qualifications:
• Minimum University degree, major in Mechanical Engineering (or any related discipline)
• Age between 30 – 45 years old
• Minimum 5 - 8 years in the same filed of expertise or equivalent competencies
• Familiar with day-to-day process control (chemical and petrochemical) & design engineering standards and drawings (PiD, Isometric)
• Preferably familiar with AutoCAD & other engineering software
• Must be organized and knowledgeable with offshore production surface facilities, including gas compression, gas processing, condensate stabilization, gas dehydration unit and glycol regeneration
3. PLANNING AND CONTROL MANAGER (CODE : PACM)
Qualifications:
• Experience in managing Project Planning and Control Division covering: development of Project planning system, Scheduling, Budgeting, Progress tracking, Progress Control System, Document Control System, Material Control system and Contract management
• Experience in developing and managing POD, AFE, WP&B for the Project
• Min 10 years in handling Project planning and control system
• Minimum University degree, majoring in Engineering
4. QA/QC COORDINATOR (CODE : QAQC)
Qualifications:
• Experience in developing QA/QC system, covering: Quality Plan, Quality Tracking & Control, Quality Audit and Quality Improvement in compliance with the regulations, codes, and standards
• Experience in obtaining government certificates and permits
• Experience in controlling the Contractors and Vendors quality
• Min 10 years in handling Project QA/QC
• Minimum University degree, majoring in Engineering
5. DISCIPLINES COORDINATOR (CODE : DISC)
Qualifications:
• Experience in coordinating multi-disciplines engineering, procurement, and construction projects
• Min 10 years experience in handling engineering, procurement, and construction projects
• Minimum University degree, majoring in Engineering
6. COMMISIONING COORDINATOR (CODE : COMC)
Qualifications:
• Experience-in coordinating multi-disciplines engineering, pro-commissioning and commissioning
• Min 10 years experience in handling engineering, procurement, and construction projects
• Minimum University degree, majoring in Engineering
7. SR. MARINE ENGINEER (CODE: SRME)
Qualifications:
• Experience in:
- Managing FPSO/FPU/MOGPU and FSO systems from initial design through manufacture and testing and onward to installation and start up
- Interface with Contractors/Vendors and other disciplines in relation to the FPSO/FPU/MOGPU, FSO and other Marine Systems
• Minimum University degree, majoring in Marine Engineering
• Min. 8 years in handling FPSO, FPU, MOGPU, FSO and other Marine systems
8. SR. CONTRACT ENGINEER (CODE : SRCE)
Qualifications:
• Experience in Developing, monitoring and controlling contract covering Contractor/Vendors and other disciplines interfacing regarding contractual matters in compliance to company standard and regulations
• Minimum University degree, majoring in Engineering (preferable in Industrial engineering or Construction management)
• Min. 8 - 10 (Ten) years in Project Control
9. SR. PROCESS ENGINEER (CODE : SRPE)
Qualifications:
• Experience in leading Process engineering team for Process Design: Design Basis, Conceptual design, Process Safety, FEED, Detail Design, Vendor/Contractor/Inter-disciplines interfacing, Pre-commissioning, Commissioning, and As Built
• University degree in Chemical Engineering
• Min 8-10 years experienced in Process engineering
10. MECHANICAL/PIPING ENGINEER (CODE : MPEN)
Qualifications:
• Experience in handling design, procurement, and constructions of Piping, Mechanical and/or Rotating system
• University degree in Mechanical engineering
• Min 2 years experienced in Piping, Mechanical and/or Rotating Engineering
11. SR. SAFETY ENGINEER (CODE : SRSE)
Qualifications:
• Understand ISO 9001 : 2000, OHSAS 18001, HSE Policy & Regulation is a must
• Familiar with Quality Tool: Failure Mode Effect Analysis, Problem Solving Tool, Statistic, Lean Manufacturing Process
• Minimum 10 years in oil and gas operation with 5 or more years as Safety Engineer
• University degree in any disciplined or Health & Environmental
GENERAL REQUIREMENTS:
• Experience in the Oil & Gas Industry for both Offshore and Onshore facilities
• Familiar with related applicable regulations, codes, and standards
• Exceptionally good communications, fluent in English (verbal and written) and interpersonal relations skills
• Highly motivated, Diligent, Team work, Computer literate, Hard & Smart worker
• Exceptionally good communications and interpersonal relations skills; upholds confidentiality
Please send your application letter, CV, current photograph and supporting document with appropriate code within 2 (two) weeks from the date of this advertisement
More info http://www.jobstreet.com/id/kangean.htm
Only qualified candidates will be notified.
We are one of the fastest growing oil & gas companies in Indonesia focusing in upstream oil and gas with a clear growth strategy, is looking for a highly qualified with good dedication professionals to fill the position as :
1. SENIOR RESERVOIR ENGINEER (CODE : SRRE)
Qualifications:
• Minimum University degree, major in Petroleum engineering (or any related discipline)
• Age between 30 - 45 years old
• Minimum of 6 - 10 years knowledge and have experience with the application of traditional and non-traditional reservoir engineering techniques including decline curve analysis, volumetric analysis, well test analysis, material balance, pressure transient analysis, economic and risk analysis and other aspects of reservoir engineering
• Familiar and able to run with Eclipse, PETEX, OFM software
2. FACILITY ENGINEER (CODE : FENG)
Qualifications:
• Minimum University degree, major in Mechanical Engineering (or any related discipline)
• Age between 30 – 45 years old
• Minimum 5 - 8 years in the same filed of expertise or equivalent competencies
• Familiar with day-to-day process control (chemical and petrochemical) & design engineering standards and drawings (PiD, Isometric)
• Preferably familiar with AutoCAD & other engineering software
• Must be organized and knowledgeable with offshore production surface facilities, including gas compression, gas processing, condensate stabilization, gas dehydration unit and glycol regeneration
3. PLANNING AND CONTROL MANAGER (CODE : PACM)
Qualifications:
• Experience in managing Project Planning and Control Division covering: development of Project planning system, Scheduling, Budgeting, Progress tracking, Progress Control System, Document Control System, Material Control system and Contract management
• Experience in developing and managing POD, AFE, WP&B for the Project
• Min 10 years in handling Project planning and control system
• Minimum University degree, majoring in Engineering
4. QA/QC COORDINATOR (CODE : QAQC)
Qualifications:
• Experience in developing QA/QC system, covering: Quality Plan, Quality Tracking & Control, Quality Audit and Quality Improvement in compliance with the regulations, codes, and standards
• Experience in obtaining government certificates and permits
• Experience in controlling the Contractors and Vendors quality
• Min 10 years in handling Project QA/QC
• Minimum University degree, majoring in Engineering
5. DISCIPLINES COORDINATOR (CODE : DISC)
Qualifications:
• Experience in coordinating multi-disciplines engineering, procurement, and construction projects
• Min 10 years experience in handling engineering, procurement, and construction projects
• Minimum University degree, majoring in Engineering
6. COMMISIONING COORDINATOR (CODE : COMC)
Qualifications:
• Experience-in coordinating multi-disciplines engineering, pro-commissioning and commissioning
• Min 10 years experience in handling engineering, procurement, and construction projects
• Minimum University degree, majoring in Engineering
7. SR. MARINE ENGINEER (CODE: SRME)
Qualifications:
• Experience in:
- Managing FPSO/FPU/MOGPU and FSO systems from initial design through manufacture and testing and onward to installation and start up
- Interface with Contractors/Vendors and other disciplines in relation to the FPSO/FPU/MOGPU, FSO and other Marine Systems
• Minimum University degree, majoring in Marine Engineering
• Min. 8 years in handling FPSO, FPU, MOGPU, FSO and other Marine systems
8. SR. CONTRACT ENGINEER (CODE : SRCE)
Qualifications:
• Experience in Developing, monitoring and controlling contract covering Contractor/Vendors and other disciplines interfacing regarding contractual matters in compliance to company standard and regulations
• Minimum University degree, majoring in Engineering (preferable in Industrial engineering or Construction management)
• Min. 8 - 10 (Ten) years in Project Control
9. SR. PROCESS ENGINEER (CODE : SRPE)
Qualifications:
• Experience in leading Process engineering team for Process Design: Design Basis, Conceptual design, Process Safety, FEED, Detail Design, Vendor/Contractor/Inter-disciplines interfacing, Pre-commissioning, Commissioning, and As Built
• University degree in Chemical Engineering
• Min 8-10 years experienced in Process engineering
10. MECHANICAL/PIPING ENGINEER (CODE : MPEN)
Qualifications:
• Experience in handling design, procurement, and constructions of Piping, Mechanical and/or Rotating system
• University degree in Mechanical engineering
• Min 2 years experienced in Piping, Mechanical and/or Rotating Engineering
11. SR. SAFETY ENGINEER (CODE : SRSE)
Qualifications:
• Understand ISO 9001 : 2000, OHSAS 18001, HSE Policy & Regulation is a must
• Familiar with Quality Tool: Failure Mode Effect Analysis, Problem Solving Tool, Statistic, Lean Manufacturing Process
• Minimum 10 years in oil and gas operation with 5 or more years as Safety Engineer
• University degree in any disciplined or Health & Environmental
GENERAL REQUIREMENTS:
• Experience in the Oil & Gas Industry for both Offshore and Onshore facilities
• Familiar with related applicable regulations, codes, and standards
• Exceptionally good communications, fluent in English (verbal and written) and interpersonal relations skills
• Highly motivated, Diligent, Team work, Computer literate, Hard & Smart worker
• Exceptionally good communications and interpersonal relations skills; upholds confidentiality
Please send your application letter, CV, current photograph and supporting document with appropriate code within 2 (two) weeks from the date of this advertisement
More info http://www.jobstreet.com/id/kangean.htm
Only qualified candidates will be notified.
BAPCO
The Bahrain Petroleum Company B.S.C. Closed
Bahrain
The Bahrain Petroleum Company (BAPCO), wholly owned by the Government of Bahrain, is engaged in the oil industry including exploration and prospecting for oil, drilling, production, refining, distribution of petroleum products and natural gas, sales and exports of crude oil and refined products. The company owns and operates a 260,000 barrels-a-day refinery, storage facilities for more than 14 million barrels, a marketing terminal and a marine terminal for its petroleum products.
To assist in our efforts to explore new oil and gas reserves and to revitalize our existing wells, we are seeking to employ suitably qualified and experienced personnel for the following positions:
Senior Geologist
The incumbent will be responsible for:
• Reservoir characterization and geocellular modeling using geo-statistical techniques, stochastic modeling, object modeling integrating well log and core data and inputs from seismic with hands on experience in geocellular modeling software.
• Construction of integrated geocellular-models honouring geoscience and petro-physical engineering and data.
• Development of the geological framework and reservoir models leading to reservoir simulation and field development planning.
• Definition and coordination of external studies from geological service consultants, as required.
Must have basic knowledge on sequence stratigraphy, formation evaluation and reservoir engineering is desirable. Working knowledge on cutting edge technology application.
The ideal candidate will hold a Degree, B.Sc., or M.Sc. in Geology, should have at least 10 years of experience in reservoir characterization and have experience in development/production geology and static reservoir modeling. Must be able to use independently modeling software preferably Gocad or Petrel.
Exploration Geologist
The job holder:
• Prepares subsurface maps and sections using standard geological techniques.
• Makes preliminary formation evaluation of old and new exploratory wells.
• Carries out Basin Modeling using advanced software applications.
• Generates and presents exploration concepts, and hydrocarbon prospects and leads.
• Compiles local and regional geological information by perusing and sifting data. Prepares dockets and documents for exploration planning.
• Preparation of exploration reports and illustrations. Includes drawing maps and preparing drafts as necessary.
• Supervises well-site programming as per standard geological practices and well-site mud logging wok, open hole logging, picking of coring, logging and casing points, watching abnormal pressures. Prepares final geological report on the well.
• Carries out other similar or related duties as required.
The candidate we are looking for shall have:
• B.Sc. or M.Sc. in Geoscience / Earth Science or equivalent.
• 10 years experience in sedimentary geology, geological interpretation of geophysical data and well-site practice.
• Good command of oral and written English.
• Knowledge and experience of geoscience applications software packages.
Development Geophysicist
The Incumbent shall:
• Interpret seismic data in regional and reservoir scale in an integrated approach with geologist (geological modeling) and with reservoir engineers (flow modeling).
• Evaluate well log and seismic signal, to build synthetic seismograms, to understand rock properties in terms of seismic calibration and technical uncertainties.
• Perform time-to-depth conversion of seismic data.
• Build of seismic attributes and seismic facies maps and correlate seismic attributes, reservoir geological properties (lithology and petrophysics) and dynamic proporties (time-lapse seismic).
• Be familiar with and interested in new technologies like 40 seismic, multicomponent seismic and new methodologies applied to reservoir seismic characterization.
The candidate we are looking for shall have:
• B.Sc./ M.Sc. Degree in Geology/Geophysics.
• 10 years experience in interpretation of seismic data and other related functions described above.
• Ability to operate seismic interpretation softwares: IESX and Geoframe applications, seismic inversion software: hampson-hussel.
• Ability to integrate geophysics and geology software and seismic modeling software packages.
Geostatistician
The incumbent shall:
• Participate in the preparation of geological models for various reservoirs based on stochastic approach.
• Generate different scenarios of property distribution stochastically constrained within a geological model.
• Associate with the Reservoir Characterization Geologist in quantification of uncertainty in reservoir heterogeneity. Assist in risk assessment of reservoir models generated considering different realizations.
• Carry out geostatistical applications to develop geological model based stochastic approach.
The ideal candidate shall have:
• A Degree in Geology (B.Sc.).
• At least 5 years of experience in applying geostatistical tools to build multiple realizations of sub surface property distribution.
• Fundamental knowledge on development geological aspects.
• Basic knowledge in log interpretation. Experience with one of the leading industry related application software preferably Gocad or Petrel.
Attractive salary and benefits package awaits the successful candidates
Please apply on line and view detailed job profile, at our website: www.bapco.net (click on the Job Opportunities link and choose Specialised category) or email your CV to : advert5@bapco.net
Human Resources Department, H-18, R-FAB,
The Bahrain Petroleum Company,
P.O. Box 25555 Awali,
Kingdom of Bahrain
Bahrain
The Bahrain Petroleum Company (BAPCO), wholly owned by the Government of Bahrain, is engaged in the oil industry including exploration and prospecting for oil, drilling, production, refining, distribution of petroleum products and natural gas, sales and exports of crude oil and refined products. The company owns and operates a 260,000 barrels-a-day refinery, storage facilities for more than 14 million barrels, a marketing terminal and a marine terminal for its petroleum products.
To assist in our efforts to explore new oil and gas reserves and to revitalize our existing wells, we are seeking to employ suitably qualified and experienced personnel for the following positions:
Senior Geologist
The incumbent will be responsible for:
• Reservoir characterization and geocellular modeling using geo-statistical techniques, stochastic modeling, object modeling integrating well log and core data and inputs from seismic with hands on experience in geocellular modeling software.
• Construction of integrated geocellular-models honouring geoscience and petro-physical engineering and data.
• Development of the geological framework and reservoir models leading to reservoir simulation and field development planning.
• Definition and coordination of external studies from geological service consultants, as required.
Must have basic knowledge on sequence stratigraphy, formation evaluation and reservoir engineering is desirable. Working knowledge on cutting edge technology application.
The ideal candidate will hold a Degree, B.Sc., or M.Sc. in Geology, should have at least 10 years of experience in reservoir characterization and have experience in development/production geology and static reservoir modeling. Must be able to use independently modeling software preferably Gocad or Petrel.
Exploration Geologist
The job holder:
• Prepares subsurface maps and sections using standard geological techniques.
• Makes preliminary formation evaluation of old and new exploratory wells.
• Carries out Basin Modeling using advanced software applications.
• Generates and presents exploration concepts, and hydrocarbon prospects and leads.
• Compiles local and regional geological information by perusing and sifting data. Prepares dockets and documents for exploration planning.
• Preparation of exploration reports and illustrations. Includes drawing maps and preparing drafts as necessary.
• Supervises well-site programming as per standard geological practices and well-site mud logging wok, open hole logging, picking of coring, logging and casing points, watching abnormal pressures. Prepares final geological report on the well.
• Carries out other similar or related duties as required.
The candidate we are looking for shall have:
• B.Sc. or M.Sc. in Geoscience / Earth Science or equivalent.
• 10 years experience in sedimentary geology, geological interpretation of geophysical data and well-site practice.
• Good command of oral and written English.
• Knowledge and experience of geoscience applications software packages.
Development Geophysicist
The Incumbent shall:
• Interpret seismic data in regional and reservoir scale in an integrated approach with geologist (geological modeling) and with reservoir engineers (flow modeling).
• Evaluate well log and seismic signal, to build synthetic seismograms, to understand rock properties in terms of seismic calibration and technical uncertainties.
• Perform time-to-depth conversion of seismic data.
• Build of seismic attributes and seismic facies maps and correlate seismic attributes, reservoir geological properties (lithology and petrophysics) and dynamic proporties (time-lapse seismic).
• Be familiar with and interested in new technologies like 40 seismic, multicomponent seismic and new methodologies applied to reservoir seismic characterization.
The candidate we are looking for shall have:
• B.Sc./ M.Sc. Degree in Geology/Geophysics.
• 10 years experience in interpretation of seismic data and other related functions described above.
• Ability to operate seismic interpretation softwares: IESX and Geoframe applications, seismic inversion software: hampson-hussel.
• Ability to integrate geophysics and geology software and seismic modeling software packages.
Geostatistician
The incumbent shall:
• Participate in the preparation of geological models for various reservoirs based on stochastic approach.
• Generate different scenarios of property distribution stochastically constrained within a geological model.
• Associate with the Reservoir Characterization Geologist in quantification of uncertainty in reservoir heterogeneity. Assist in risk assessment of reservoir models generated considering different realizations.
• Carry out geostatistical applications to develop geological model based stochastic approach.
The ideal candidate shall have:
• A Degree in Geology (B.Sc.).
• At least 5 years of experience in applying geostatistical tools to build multiple realizations of sub surface property distribution.
• Fundamental knowledge on development geological aspects.
• Basic knowledge in log interpretation. Experience with one of the leading industry related application software preferably Gocad or Petrel.
Attractive salary and benefits package awaits the successful candidates
Please apply on line and view detailed job profile, at our website: www.bapco.net (click on the Job Opportunities link and choose Specialised category) or email your CV to : advert5@bapco.net
Human Resources Department, H-18, R-FAB,
The Bahrain Petroleum Company,
P.O. Box 25555 Awali,
Kingdom of Bahrain
Friday, September 12, 2008
FIRCROFT
Our Client, an international oil and gas company is currently looking for:
Senior Geologist (Balikpapan Based)
Job Description:
• Guarantee pertinence, reliability and quality of data and geological measurement acquired while drilling.
• Define, propose, set-up and supervise well data acquisition program compliance with safety requirements in the fields of drilling and geology, while optimizing costs and quality.
• Contribute to the safety operations through real-time detection of geological and down hole conditions that could have and adverse effect on drilling and geology, while optimizing costs and quality.
• Contribute to the safety operations through real time detection of geological and down hole conditions that could have and adverse effect on drilling.
• Select and supervise contracted services.
• Contribute to the estimation of the groups OHIP by conducting geological and petrophysical interpretations and syntheses.
Requirement:
• Bachelor degree in geo science.
• 3 to 5 five years or more experience in oil & gas field delineation/ development.
• Extensive knowledge on well operations & data acquisition, correlation, subsurface mappings and volumetric calculations.
• Ability to integrate reservoir dynamic data would be an added value.
Construction Site Representative (CSR) (Field based)
Job Description:
• To establish a clear policy and general rules to be applied to each discipline, in order to have a coherent and homogeneous Construction Team.
• To give clear instruction and responsibilities to all members of Team in order that they feel at ease and motivated.
• To be convinced as all members of the Team that, in addition to quality and good engineering practice, planning and cost must be a permanent concern.
• To make necessary arbitration between different disciplines, the only criteria being the benefit of the overall project.
• To maintain good relationships with Contractors, being flexible enough but also strict when necessary to achieve the objective of the project.
• To liaise with Safety, Cost, Planning and Administration sections to improve effectiveness of Team.
• Represent project regarding the specific contract or purchase order, protecting company’s interests and influencing decisions.
• Keep informed the project manger of all events which may effect the successful completion of the project goals.
Requirement:
• Bachelor degree in any engineering background.
• Typically 10 years relevant experience, with a minimum of 5 years in a Construction managerial role within a project.
• Recognized level of expertise in a construction
Information System Security Engineer/Telecom Engineer (Balikpapan based)
Job Description:
• Reporting to Head of IS & Telecom Division.
• Preserving, controlling and promoting IS & Telecom Security within the subsidiary (Jakarta, Balikpapan, and sites).
• Conducting security assessment, business risks/impact analysis and audit upon the IS & Telecom facilities.
• Improving and preserving an appropriate level of security throughout the IS & Telecom facilities.
• Handling or responding to any security incidents that may or have threatened the subsidiary s Information assets.
• Liaising with headquarter in implementing the Corporate IS & Telecom security policy and strategy
Personal Requirements:
• Bachelor degree in Information System/Telecommunication/ Electrical/ Computer Sciences.
• Minimum 3 years experience in Information System and Telecommunication security.
Engineer Marine HSE (Balikpapan based)
Job Description:
• Ensuring the implementation of international safety standard and company regulation that related with marine.
• Create improvement or provide recommendation in the marine department.
• Has strong knowledge regarding operational methods and procedure.
Personal Requirements:
• Bachelor degree in Naval/Marine/Ocean engineering would be preferable.
• Have 3-5 years of field working experience.
• Have high interest to write and creating procedures, concept, or method.
• Good English proficiency, especially in writing.
A highly competitive remuneration package will be offered to attract top caliber applicants. Please send your CV (in MS Word version) to:
indonesia@fircroft.com
Senior Geologist (Balikpapan Based)
Job Description:
• Guarantee pertinence, reliability and quality of data and geological measurement acquired while drilling.
• Define, propose, set-up and supervise well data acquisition program compliance with safety requirements in the fields of drilling and geology, while optimizing costs and quality.
• Contribute to the safety operations through real-time detection of geological and down hole conditions that could have and adverse effect on drilling and geology, while optimizing costs and quality.
• Contribute to the safety operations through real time detection of geological and down hole conditions that could have and adverse effect on drilling.
• Select and supervise contracted services.
• Contribute to the estimation of the groups OHIP by conducting geological and petrophysical interpretations and syntheses.
Requirement:
• Bachelor degree in geo science.
• 3 to 5 five years or more experience in oil & gas field delineation/ development.
• Extensive knowledge on well operations & data acquisition, correlation, subsurface mappings and volumetric calculations.
• Ability to integrate reservoir dynamic data would be an added value.
Construction Site Representative (CSR) (Field based)
Job Description:
• To establish a clear policy and general rules to be applied to each discipline, in order to have a coherent and homogeneous Construction Team.
• To give clear instruction and responsibilities to all members of Team in order that they feel at ease and motivated.
• To be convinced as all members of the Team that, in addition to quality and good engineering practice, planning and cost must be a permanent concern.
• To make necessary arbitration between different disciplines, the only criteria being the benefit of the overall project.
• To maintain good relationships with Contractors, being flexible enough but also strict when necessary to achieve the objective of the project.
• To liaise with Safety, Cost, Planning and Administration sections to improve effectiveness of Team.
• Represent project regarding the specific contract or purchase order, protecting company’s interests and influencing decisions.
• Keep informed the project manger of all events which may effect the successful completion of the project goals.
Requirement:
• Bachelor degree in any engineering background.
• Typically 10 years relevant experience, with a minimum of 5 years in a Construction managerial role within a project.
• Recognized level of expertise in a construction
Information System Security Engineer/Telecom Engineer (Balikpapan based)
Job Description:
• Reporting to Head of IS & Telecom Division.
• Preserving, controlling and promoting IS & Telecom Security within the subsidiary (Jakarta, Balikpapan, and sites).
• Conducting security assessment, business risks/impact analysis and audit upon the IS & Telecom facilities.
• Improving and preserving an appropriate level of security throughout the IS & Telecom facilities.
• Handling or responding to any security incidents that may or have threatened the subsidiary s Information assets.
• Liaising with headquarter in implementing the Corporate IS & Telecom security policy and strategy
Personal Requirements:
• Bachelor degree in Information System/Telecommunication/ Electrical/ Computer Sciences.
• Minimum 3 years experience in Information System and Telecommunication security.
Engineer Marine HSE (Balikpapan based)
Job Description:
• Ensuring the implementation of international safety standard and company regulation that related with marine.
• Create improvement or provide recommendation in the marine department.
• Has strong knowledge regarding operational methods and procedure.
Personal Requirements:
• Bachelor degree in Naval/Marine/Ocean engineering would be preferable.
• Have 3-5 years of field working experience.
• Have high interest to write and creating procedures, concept, or method.
• Good English proficiency, especially in writing.
A highly competitive remuneration package will be offered to attract top caliber applicants. Please send your CV (in MS Word version) to:
indonesia@fircroft.com
CONOCOPHILLIPS
We have a job opening for immediate employment.
Area Facility Engineer
BASIC PURPOSE
• Responsible to provide innovation for plant production optimization
• Responsible to monitor plant performance
• Responsible to provide daily technical assistance and support the oil/gas plant (and pipeline) operation
• Responsible to have thorough knowledge and own operation asset
• Responsible to review/study actual condition field using heat & material balance simulator and pipeline simulator
QUALIFICATION & EXPERIENCE:
• Engineering degree from recognized university or institution preferable from Chemical Engineering or Gas Engineering
• Having 3-8 years experience in oil and gas industry preferably in gas/oil production & optimization
• Strong leadership and interpersonal skill
• Strong team player with proactive approach to decision making process
• Ability to work under diverse cultures and nationality
RELIABILITY ENGINEER
Basic Function:
To provide day to day engineering and maintenance support to field operation. Identify maintenance opportunities to improve reliability. Implement work processes developed by OEE to improve reliability of equipment. Review LPO’s and actively pursue defect elimination opportunities.
• Perform mini-RCA’s and ensure follow-up of action items are performed
• Review LPO’s and determine when mini RCA’s are necessary
• Participate in midi/maxi RCA’s as requested.
• Review maintenance strategies and suggest improvements through the MCR process
• Keep abreast of new reliability technologies available and suggest improvements.
• Monitor maintenance reliability metrics and assist planners in developing action plans to resolve reliability issues
• Work with service providers and vendors regarding warranty issues
• Prepare material master data
• Participate in the reliability improvement of new assets
Qualification/Experience:
• Bachelor Degree (S1) in Mechanical / Electrical / Instrument / Chemical Engineering
• At least 7-10 years experience in a maintenance and engineering role in oil & gas industry
• Good interpersonal and communications skills
• Preventative and Predictive maintenance experience
• Mechanical Integrity and Process Safety Management knowledge
• Oil & Gas industry experience
• SAP experience
Write down THE POSITION TITLE you apply in the subject of your email.
Send your application and CV to: RSCJakartaRecruitment@conocophillips.com
This posting will be closed on 25 September 2008.
Only very short-listed candidates will be contacted for further process
Area Facility Engineer
BASIC PURPOSE
• Responsible to provide innovation for plant production optimization
• Responsible to monitor plant performance
• Responsible to provide daily technical assistance and support the oil/gas plant (and pipeline) operation
• Responsible to have thorough knowledge and own operation asset
• Responsible to review/study actual condition field using heat & material balance simulator and pipeline simulator
QUALIFICATION & EXPERIENCE:
• Engineering degree from recognized university or institution preferable from Chemical Engineering or Gas Engineering
• Having 3-8 years experience in oil and gas industry preferably in gas/oil production & optimization
• Strong leadership and interpersonal skill
• Strong team player with proactive approach to decision making process
• Ability to work under diverse cultures and nationality
RELIABILITY ENGINEER
Basic Function:
To provide day to day engineering and maintenance support to field operation. Identify maintenance opportunities to improve reliability. Implement work processes developed by OEE to improve reliability of equipment. Review LPO’s and actively pursue defect elimination opportunities.
• Perform mini-RCA’s and ensure follow-up of action items are performed
• Review LPO’s and determine when mini RCA’s are necessary
• Participate in midi/maxi RCA’s as requested.
• Review maintenance strategies and suggest improvements through the MCR process
• Keep abreast of new reliability technologies available and suggest improvements.
• Monitor maintenance reliability metrics and assist planners in developing action plans to resolve reliability issues
• Work with service providers and vendors regarding warranty issues
• Prepare material master data
• Participate in the reliability improvement of new assets
Qualification/Experience:
• Bachelor Degree (S1) in Mechanical / Electrical / Instrument / Chemical Engineering
• At least 7-10 years experience in a maintenance and engineering role in oil & gas industry
• Good interpersonal and communications skills
• Preventative and Predictive maintenance experience
• Mechanical Integrity and Process Safety Management knowledge
• Oil & Gas industry experience
• SAP experience
Write down THE POSITION TITLE you apply in the subject of your email.
Send your application and CV to: RSCJakartaRecruitment@conocophillips.com
This posting will be closed on 25 September 2008.
Only very short-listed candidates will be contacted for further process
BP Indonesia
In our quest to become a leading force in proving energy without damaging the natural environment, our exploration and production business plays a major part.
BP has operated for over 35 years in Indonesia (www.bp.com/Indonesia). Today, we are one of the largest foreign investors in the country, with a cumulative capital investment to date of over US$5 billion.
At BP, not only will you get the benefit of being able to use your full range of skills, but as an experienced professional you’ll also get to work on one of the most exciting oil and gas projects in Indonesia located either in our Jakarta Office. If you’re looking for a new challenge in your career and are performance driven, innovative, progressive and care about safety and environment, BP Indonesia could have the opportunity you’re looking for.
Applications are now open to join our team as:
• Process Engineer
• Project Engineer – Onshore Receiving Facilities (ORF)
• Project Engineer – Onshore Facilities Outside of Battery Limits (OSBL)
Self-starter as well as strong team player in multi-disciplinary team environment plus a good command of both oral and written English are essential for all roles above.
For more technical information, a broader understanding of each role and to apply online, go to www.bp.com/careers/Indonesia
Applications close September 30, 2008
BP has operated for over 35 years in Indonesia (www.bp.com/Indonesia). Today, we are one of the largest foreign investors in the country, with a cumulative capital investment to date of over US$5 billion.
At BP, not only will you get the benefit of being able to use your full range of skills, but as an experienced professional you’ll also get to work on one of the most exciting oil and gas projects in Indonesia located either in our Jakarta Office. If you’re looking for a new challenge in your career and are performance driven, innovative, progressive and care about safety and environment, BP Indonesia could have the opportunity you’re looking for.
Applications are now open to join our team as:
• Process Engineer
• Project Engineer – Onshore Receiving Facilities (ORF)
• Project Engineer – Onshore Facilities Outside of Battery Limits (OSBL)
Self-starter as well as strong team player in multi-disciplinary team environment plus a good command of both oral and written English are essential for all roles above.
For more technical information, a broader understanding of each role and to apply online, go to www.bp.com/careers/Indonesia
Applications close September 30, 2008
Wednesday, September 3, 2008
SHELL MALAYSIA
Shell is a bussines that’s built on ideas. We believe that for every problem, there’s a solution – that anything can be done if we put our main on it. Turn gas to liquid? Difficult but not impossible. Make coal burn as deanly as a gas? With a bit of original thinking, yes.
CONOCOPHILLIPS
We have a job opening for immediate employment.
Integrated Planner
BASIC PURPOSE:
• Combine all activities from each area or department in Onshore Operations into one integrated planning, to enable doing conflict resolution, optimization of resources, cost and timeline.
• Develop and maintain the tools, forms or database program for budget controlling, Contract managing, and monitoring other activities to achieve internal effectiveness.
QUALIFICATION & EXPERIENCE:
Minimum Requirement:
Education: Min. S1 of Technical Engineering
Experiences: Min. 3 years involved in any Construction project with multi craft, preferred in oil and gas field.
Computer Literate: Used to develop database program (i.e. MS Access), familiar with MS Excell Micro program, MS Project and Primavera
English: Fluently speaking and writing
Soft Skills:
• Able to give presentation in English.
• Good communication and inter personnel skill to effectively interface with field production operation personnel, multidiscipline department and other supporting department.
• Strong written and oral skills and in interpersonal style that is effective in team roles.
• Understand fundamental of teamwork, be able to handle conflict management, and use diversity of a team effectively.
Technical Skills and/or Other Requirement:
• Capable to identifying a need for a plan, and who is responsible for the plan (roles and responsibilities)
• Contributes to team based on problem solving and decision making sessions.
• Demonstrates ability in identifying gaps between actual performance and target goals.
• Experienced in the principles of effective materials management.
• Skilled in using tools for cost tracking data.
Write down THE POSITION TITLE you apply in the subject of your email.
Send your application and CV to: RSCJakartaRecruitment@conocophillips.com
This posting will be closed on September 16, 2008.
Only very short-listed candidates will be contacted for further process.
Integrated Planner
BASIC PURPOSE:
• Combine all activities from each area or department in Onshore Operations into one integrated planning, to enable doing conflict resolution, optimization of resources, cost and timeline.
• Develop and maintain the tools, forms or database program for budget controlling, Contract managing, and monitoring other activities to achieve internal effectiveness.
QUALIFICATION & EXPERIENCE:
Minimum Requirement:
Education: Min. S1 of Technical Engineering
Experiences: Min. 3 years involved in any Construction project with multi craft, preferred in oil and gas field.
Computer Literate: Used to develop database program (i.e. MS Access), familiar with MS Excell Micro program, MS Project and Primavera
English: Fluently speaking and writing
Soft Skills:
• Able to give presentation in English.
• Good communication and inter personnel skill to effectively interface with field production operation personnel, multidiscipline department and other supporting department.
• Strong written and oral skills and in interpersonal style that is effective in team roles.
• Understand fundamental of teamwork, be able to handle conflict management, and use diversity of a team effectively.
Technical Skills and/or Other Requirement:
• Capable to identifying a need for a plan, and who is responsible for the plan (roles and responsibilities)
• Contributes to team based on problem solving and decision making sessions.
• Demonstrates ability in identifying gaps between actual performance and target goals.
• Experienced in the principles of effective materials management.
• Skilled in using tools for cost tracking data.
Write down THE POSITION TITLE you apply in the subject of your email.
Send your application and CV to: RSCJakartaRecruitment@conocophillips.com
This posting will be closed on September 16, 2008.
Only very short-listed candidates will be contacted for further process.
ENI INDONESIA
Material Specialist Supervisor
Location: Jakarta
Company overview
Eni is a major integrated international oil and gas company based in Italy, with interests in 70 different countries, and employs some 73,000 people worldwide. Eni has been exploring and producing hydrocarbons for almost eighty years.
Eni has Exploration & Production activities in Italy, West and North Africa, US, South America, North Sea, Kazakhstan and Asia. Eni Indonesia participates in eleven PSCs in Indonesia, including nine in Deep Water, and is pursuing an active exploration and development program with drilling activities to commence in October 2008.
Position requirements
A University degree in Engineering or related discipline is a prerequisite. You should have minimum 10 years experience in Offshore/Onshore Oil Industry in position related to Logistic, Material Management, Warehousing, Shipping, Receiving, Regulatory Import Export of Oil Business related Material and Equipment.
You must be a good communicator with highly effective multi-disciplinary team working skills. Previous coaching experience is a plus and you have to be capable to organize your job autonomously according to the requirements of on going operations.
Position responsibilities
You will be expected to master Material Coding: using Company Material Management System, to have knowledge of oilfield goods import-export process, and to expedite process of the Master List in all the different stages. This position is based in Jakarta.
Your role will involve daily monitoring & reports of material inventory and the daily field activity to update material inventory of Company. Your skills must include Rental Equipment Management, Explosives, Radioactive Permissions, Safety Management, and Material Data Sheet. Your capability to conduct auditing process and warehouse management, Material Transfer procedures between PSC, and Transportation issues including safety via sea, air and land is required.
Please apply for this advertisement to:
Harnita Kamal
PO Box 3260
Jakarta 10000
Please note that applications may not be reviewed if received after the 9th of September 2008.
Location: Jakarta
Company overview
Eni is a major integrated international oil and gas company based in Italy, with interests in 70 different countries, and employs some 73,000 people worldwide. Eni has been exploring and producing hydrocarbons for almost eighty years.
Eni has Exploration & Production activities in Italy, West and North Africa, US, South America, North Sea, Kazakhstan and Asia. Eni Indonesia participates in eleven PSCs in Indonesia, including nine in Deep Water, and is pursuing an active exploration and development program with drilling activities to commence in October 2008.
Position requirements
A University degree in Engineering or related discipline is a prerequisite. You should have minimum 10 years experience in Offshore/Onshore Oil Industry in position related to Logistic, Material Management, Warehousing, Shipping, Receiving, Regulatory Import Export of Oil Business related Material and Equipment.
You must be a good communicator with highly effective multi-disciplinary team working skills. Previous coaching experience is a plus and you have to be capable to organize your job autonomously according to the requirements of on going operations.
Position responsibilities
You will be expected to master Material Coding: using Company Material Management System, to have knowledge of oilfield goods import-export process, and to expedite process of the Master List in all the different stages. This position is based in Jakarta.
Your role will involve daily monitoring & reports of material inventory and the daily field activity to update material inventory of Company. Your skills must include Rental Equipment Management, Explosives, Radioactive Permissions, Safety Management, and Material Data Sheet. Your capability to conduct auditing process and warehouse management, Material Transfer procedures between PSC, and Transportation issues including safety via sea, air and land is required.
Please apply for this advertisement to:
Harnita Kamal
PO Box 3260
Jakarta 10000
Please note that applications may not be reviewed if received after the 9th of September 2008.
SHELL BRUNEI
Shell Brunei is Looking for Candidates for Direct Hire Through Serikandi Oilfield Services for the Positions:
WELL ENGINEER OPERATIONS (Code: DTHC-07-08)
Purpose of Job
• To provide detailed planning and programming of drilling, completion and workover activities to deliver “fit for purpose” wells at maximum value in terms of cost versus benefits, which meet the requirements of the Development and/or Exploration function while adhering to Company s policies, procedures and guidelines on well delivery operations.
• To implement the “Delivering The Limit (DTL)” methodology. Organise and facilitate challenge sessions DWOP s and AAR s for their projects and act as operations engineer through execution phase on some projects, for which the "cradle to grave" principle can be applied.
• Maintain and monitor the companies lessons learned database and ensure transfer of knowledge across the rig teams.
• Identify opportunities to implement cost saving / value enhancing breakthrough performance in designs with application of radical techniques.
• Make use of global lateral learning through wells global network and import best practice.
• To ensure Company s HSE objectives are met.
Principle Accountabilities
Health, Safety and Environment (HSE)
• Ensures full compliance with the company s HSE policies and procedures as detailed in the Safety Management System, HSE Standards and all other appropriate HSE documentation.
• Conduct relevant HSE-Critical activities as specified in the HSE-Critical Activities Register.
• Set a clear leadership example and promotes a high degree of health, safety and environmental awareness among subordinates.
• Review effectiveness of rig HSE management by line inspection. Provides input to the department HSE Plan and is accountable for follow-up and documentation of close-out of individual and subordinates action points, identified in the HSE plan.
• Fully brief well-site personnel prior to safety critical / non-routine activities such as CPRA and well testing.
• Co-ordinate the follow-up and close-out of rig related action points resulting from near miss and incident reports and HSE visits and audits.
• Encourage well site staff in hazard awareness and risk assessment, generation of hazard-, near miss- and incident reports, by continuous attention and communication.
Well Planning & Execution of Operations
• Strive for full adherence to the Company Well Delivery Process description and the associated time line.
• Prepare departmental input for well proposals and ensures well proposals are optimised with respect to well quality, HSE and cost efficiency.
• Design wells and manages the generation of fit for purpose well programmes.
• Maintain close liaison with the Material Scheduler to ensure forward planning for all non-standard direct charge material requirements ascertained from preparation of well proposals and/or well programmes.
• Supervise and direct well-site personnel in the execution of the ongoing and planned well operations.
• Plan and execute all well operations in full compliance with Company procedures, policies and guidelines.
• Provide timely and accurate information to other departmental units on operational status and any deviations from plans, programmes, policies, procedures or guidelines.
• Facilitate short term planning and scheduling of personnel, equipment and services required for the well operations under his control. Ensures update of well files such as operations progress, writing of end of well reports and reporting / documentation of non-standard or irregular operations and events.
Concurrent Production and Rig Activities (CPRA)
• Manage CPRA involving the rig for which he is responsible.
• Ensure that the platform specific CPRA Safety Case has been issued and the requirements have been implemented prior to starting CPRA.
• Ensure full compliance with CPRA procedures for the duration of CPRA. Monitors co-ownership production deferment booked against CPRA activities.
Well Tie-In
• Manage well tie-in involving the rig for which he is responsible.
• Ensure that the all approvals have been obtained and that adequate procedures and documentation is available on the rig prior to prior to starting well tie-in.
• Liaise with Engineering and Construction departments in matters involving preparation for and execution of well tie-in activities.
Rig Move and Platform Access
• Schedule and attend rig move meetings and liaises with other departments during the preparation of the actual rig move.
• Ensure rig move, involving the rig are planned and discussed with all parties prior to execution of rig move operations.
• Verify and ensure well integrity in line with the company s procedures prior to performing any heavy lifts and/or approaching a platform/well jacket with his rig.
• Ensure platform/well jacket is handed over in accordance with procedures.
Management of Costs
• Review contents of the well proposal and challenges all aspects where alternative more cost effective solutions are available to meet the technical demands and requirements of the well objectives.
• Compilation and submission of the Level 3 and Value of Work Done (VOWD) Cost Estimates using the approved procedures and formats (software).
• Challenge and verifies all available cost data for inclusion in cost estimates to ensure required accuracy is achieved. Monitors and challenges the reported daily cost using the approved cost reporting facilities.
• Monitor the accumulating well cost versus the planned cost, reporting all variances to the departmental units as appropriate.
• Prepares any programme amendment costings as required and ensures necessary approvals are obtained.
Close Out, Reporting & Performance Monitoring
• Ensure the Drilling Supervisor prepares end of the well reports in the approved format.
• Provide feedback to other departmental units on the use and recommendations for improvement of the software programmes in place.
• Provide feedback to the contracts section on the use and recommendations for improvement of the drilling rig and drilling service contracts.
• Provide input for the monthly MIR and quarterly review reports. Ensures all data derived from the wellsite operations is validated.
• Perform cost performance analysis as required and documents all operations where, technically feasible, more cost effective solutions exist.
• Ensure dissemination of the performance analysis by inclusion in the relevant section of the end of well report.
• Closely monitor all incidents of Non-Productive Time (NPT), ensures full and proper reporting of all incidence of NPT in WIS and end of well reports and reviews to capture cost implications and learning points.
• Maintain regular contact with drilling contractor and service company representatives to ensure mutual understanding of operational requirements as well as to identify opportunities for quality improvements.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course.
• Good interpersonal relations and communication skills as well as good working knowledge of well engineering software packages are also required.
• Able to work in teams while maintaining the capability and flexibility for independent action.
• Selected candidates will be encouraged to follow the Shell Group “Round 2” Distance Learning Programme with the aim of obtaining this qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering discipline.
• Minimum 8 years Well Engineering experience of which at least 2 years as Drilling Supervisor.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
DRILLING SUPERVISOR (Code : DTHC-06-08)
Purpose of Job
• The Drilling Supervisor is responsible for the day-to-day on Site planning and execution of drilling, completion and workover activities, maintaining maximum Health, Safety and Environment (HSE) and operational efficiency, at maximum value in terms of cost versus benefits.
• Responsible for implementation of all the company s policies, procedures and guidelines on drilling operations, safety and environmental protection.
• Representative on Site and is responsible for first line response and problem solving of non planned operations.
• Provides guidance and advice to Well-site Drilling Engineers and Assistant Drilling Supervisors and takes an active role in their training and development.
Principle Accountabilities
• Supervise the execution of drilling, completion and workover activities.
• Supervise the drilling contractors and service personnel to ensure all work performed conform to safety, quality and highest value requirements and in accordance with the well programme.
• Responsible for day-to-day optimisation of activities and provision of first line action and problem solving in case of unexpected events.
• Provide sufficient, accurate and timely data to office based Well Delivery Team members.
• Co-ordinate the timely supply of required equipment, consumables and specialist services to ensure uninterrupted continuation of operations.
• In order to broaden his experience and develop his communication skills, he may be assigned to high profile drilling activities such as HPHT and or Deep Water Exploration Drilling.
Health, Safety and Environment (HSE)
• Ensure full Well-site compliance with the Company HSE policies and standards.
• Conduct relevant HSE-Critical activities.
• Ensure all personnel are fully conversant with, and strictly adhere to, their responsibilities as detailed in the Safety Case for the respective installation.
• Set a clear leadership example and promotes a high degree of HSE awareness among subordinates.
• Review effectiveness of rig HSE systems by inspection and audit. Reviews effectiveness of rig HSE communication by line inspection.
• Promote the practical implementation of the Hazard and Effects Management Process (HEMP).
• Fulfill tasks identified in the departmental HSE Plan.
• Co-ordinate activities on the rig affecting HSE matters.
• Ensure all non-routine hazardous work is performed under the permit to work (PTW) system.
• Ensure all near miss incidents and incidents resulting in injury or damage to assets, equipment or the environment are reported and that assigned incidents and near miss events are investigated, reported and documented.
• Shall be certified PTW Authorised Signatory.
Emergency Response
• Co-ordinate the Company s response at the Site and as On-Scene Representative to assists the Drilling Contractor in his function as On-Scene Commander in dealing with an emergency.
• Is fully conversant with Company and Contractor Emergency Response Procedures and ensures the rig and Contractor is fully prepared for an emergency.
• Test rig site emergency preparedness at regular intervals. Shall have attended the Company On-Scene Commander course and be assessed competent, within 6 months of assuming the function.
Concurrent Production and Rig Activities (CPRA)
• Is familiar with Concurrent Production and Rig Activity (CPRA) procedures (TMS-4) and the platform specific CPRA Safety Case and ensures that all operations are performed in full compliance with these procedures.
• Supervise non Well Engineering staff and contractors in execution of CPRA Third Activities.
• Take a pro-active role in the preparation and execution of CPRA activities and ensures the weekly CPRA.
Personnel
• Promote an atmosphere of mutual trust and respect amongst all personnel onboard the work unit or at the drilling site.
• Provide active support to Well-site Drilling Engineers in their development efforts, in particular in preparation for their professional certification examinations.
• Train new Well-site Drilling Engineers in their prime roles and responsibilities, in particular logistics management, filing and reporting. Participates in staff appraisal exercises.
Reporting of daily operations
• Report directly to the Well Delivery Team but functionally reports to the Senior Drilling Engineer on all matters pertaining to the conduct of operations at the Well-site in accordance with the requirements of the Well Engineering Manual.
• Input and verifies the accuracy of Well Information System (WIS) daily drilling reports.
• Responsible for processing end of well reports, as per Well Engineering Manual standards, for selected wells.
Contract management
• Responsible for the implementation of all relevant contracts and their variations.
• Responsible for the monitoring and reporting of contractor service quality.
• Inform contract holders of all service provision deficiencies and contractor non-compliance.
Personal Development
• Maintain an active interest in and familiarizes with operations.
• Is present during the Drilling the Well on Paper (DWOP) and other meetings taking place as part of the activity planning process.
• Maintains the Skills Portfolio Logbook up to date.
• Performs small office based projects in well engineering subjects during time off.
Management of costs
• Responsible for the daily expenditure and reporting using cost reporting facility.
• Calculate the cost of services execution based on the job execution record and contract rates.
• Minimise equipment rental time and personnel on board by the timely and efficient transfer of materials and personnel to and from the rig.
• Has full authority for call out of equipment and personnel.
Close out, reporting and performance monitoring
• Provide data, assists in the preparation of, and conducts well review presentations.
• Ensure well file is kept up to date.
• Provide recommendations for improvement of the WIS and cost reporting system, the accounts guide / coding system and drilling rig / drilling service contracts.
• Assist in longer term operational decision making, performs cost benefit analysis on all programmed operational steps to ensure cost efficient operation, suggests alternative procedures when appropriate cost benefits are perceived.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course.
• Good interpersonal relations and communication skills as well as good working knowledge of well engineering software packages are also required.
• Able to work in teams while maintaining the capability and flexibility for independent action.
• Selected candidates will be encouraged to follow the Shell Group “Round 2” Distance Learning Programme with the aim of obtaining this qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering discipline.
• Minimum 8 years Well Engineering experience of which at least 2 years as Drilling Supervisor.
Remark
Work Schedule – Standard work pattern or 28 by 28 rotation.
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
RESERVOIR ENGINEER (Code : DTHC-05-08)
Purpose of Job
To provide reservoir engineering contribution within a multi-disciplinary team environment to the appraisal, development and reservoir management of the fields. The job covers a broad range of responsibilities including carrying out reservoir studies with the objectives of optimising Asset performance and maximising economic hydrocarbon recovery of the fields.
Principle Accountabilities
• Identify and quantify opportunities for appraisal, development, production optimisation and utilisation of new technologies and tools. The work may include integrated development studies utilising detailed integrated reservoir simulation studies and economic evaluations.
• Implement approved appraisal / development plans, and production policies.
• Surveillance and optimisation of existing developments viz. Identification of data gathering requirements, and providing input and advice for operational activities (e.g. logging, testing) and to well operations planning and well evaluations.
• Ensure that reservoir engineering data and documentation pertaining to the allocated reservoirs are validated and stored in a retrievable manner.
• Support and contribute to the Hydrocarbon resource volume and production forecasting administration, and annual Business Plan processes.
• Liaison with the shareholders to ensure timely value assurance, budget approvals and performance reporting.
• Participate in peer assists both within Company and regionally (VtV, VARs).
• Coaching, mentoring & developing local Bruneian staff will be an integral part of the job.
Skill/Competence
• Experience in mature field management and secondary recovery processes.
• Experience with Exploration/Appraisal support.
• Broad experience in analytical and reservoir simulation modelling (1D to 3D).
• Have completed all basic Core Discipline training (Reservoir Engineering).
Minimum Qualifications and experience required
• A degree in Petroleum/Chemical Engineering degree or any other engineering/science degree.
• Minimum of 8 years of Reservoir Engineering, including well-site drilling and logging / well testing operations experience.
• Broad experience in various logging technology and petrophysical interpretation technique, including open hole, cased hole and core-log evaluation.
• Experienced in Petrophysics data management and integration.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
PRODUCTION TECHNOLOGIST (Code : DTHC-04-08)
Purpose of Job
To provide comprehensive Production Technology expertise to the subsurface study team in a Petroleum Engineering organisation.
Principle Accountabilities
• Provide production technology input into the study team to ensure project value is maximised.
• Perform studies covering but not limited to sand management, smart well deployment, completion and stimulation design.
• Implement fit-for-purpose technologies to maximise project value.
• Lead a project through the well delivery process.
• Provide Production Technology input in VARs, RtLs and peer assists, as required.
• Coaching, mentoring & developing local Bruneian staff will be an integral part of the job.
Skill/Competence
• A good team player with track record in conducting Production Technology studies. Experience in oil rim development and gas cap blowdown studies would be an advantage.
• Excellent inter-personal and team skills. Experience working in a multi-discipline and/or multi-cultural team would be advantage.
• A proven ability to apply innovative and cost-effective ways of working is expected.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering discipline.
• Minimum of 8 years in Production technology experience with field development planning experience.
• Proficient in the use of the following tools; Prosper, IPM, Welcat. Experience in PWRI-frac, FIST, STIM2001 and Shellfrac would be an advantage.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
PETROPHYSICS ENGINEER (Code : DHTC-03-08)
Purpose of Job
To provide petrophysical engineering support within a multi-disciplinary team environment to the appraisal, development, reservoir studies and management of the assets within the Company s Asset Units.
Principle Accountabilities
• Review and analyse all available petrophysical data of his area of studies, enhance and validate petrophysical interpretation in order to optimise use and integration of data in the construction of static and dynamic reservoir models.
• Provide correct integration of petrophysical information, understanding and requirements into development plans and activity proposals.
• Translate well objectives and business requirements into fit-for-purpose, cost effective data acquisition strategy and programs.
• Provide operational input and support to well and reservoir surveillance activities, e.g. well reviews, cased hole data acquisition for reservoir monitoring, well engineering operations planning and support, including well-site operations where necessary.
• Co-ordinate and QA/QC petrophysical log and core data acquisition activities, and provide operational petrophysical support and evaluation of new data acquired.
• Ensure the integrity of the corporate log database.
• Keep up to date with new technology developments within the discipline and acquire other Petroleum Engineering disciplines basic knowledge to allow an active participation in multidisciplinary groups.
• Coaching, mentoring & developing local Bruneian staff will be an integral part of the job.
Skill/Competence
• Petrophysics – Skill.
• Geophysics (+quantitative interpretation) – Knowledge.
• Geology – Knowledge.
• Reservoir engineering – Knowledge.
• A proven ability to apply innovative and cost-effective ways of working is expected.
Minimum Qualifications and experience required
• A degree in Petroleum/Chemical Engineering degree or any other engineering/science degree.
• Minimum of 8 years of experience in petrophysical and subsurface engineering, including well-site operations experience/exposure.
• Broad experience in various logging technology and petrophysical interpretation technique, including open hole, cased hole and core-log evaluation.
• Experienced in Petrophysics data management and integration.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
PRODUCTION GEOLOGIST (Code : DHTC-02-08)
Purpose of Job
To provide comprehensive production and reservoir geology input within a multi-disciplinary team environment intoa full field development studies with primary focus on maturing water flood opportunities.
Principle Accountabilities
• Work in close collaboration with multi-disciplinary team consisting of production geophysicists & geologist, reservoir engineers, production Technologists, Petrophysicist, well engineers and front-end facilities engineers supported by technical assistants, study team leader and the development leadership team to define the work scope.
• Contribute to the planning and scheduling of study project and on the key milestones such as reviews/challenge sessions, VARs, reserves booking and reporting. Familiarity of the OPMG, V2V and the VAR process is an advantage.
• Participate in internal and external reviews as well as audits on studies and resource volumes, VARs- Perform basic data collection for the study, QC and validation.
• Identify, quantify and optimise secondary recovery (water injection) opportunities in a mature area. The work will include detailed integrated reservoir geological modelling.
• Carry out all required evaluations prior to the start of 3D static modelling.
• Identify and assess risks and uncertainties, apply multiple scenarios approach in the field development planning study leading to the maturing of the development concept.
• Contribute to the field development plan documentation.
• Provide support to the 3D seismic interpretation as required.
• Firm up further oil development and water injection drilling targets, prepare the well data packs and monitor the drilling activities.
• Provide input and advice for operational activities (e.g. well proposals, logging, testing) and well planning and evaluations.
• Mentoring & developing young Bruneian staff will be an integral part of the job.
Skill/Competence
• Previous experience on water injection projects is highly desirable.
• Experience with static reservoir modelling is a must (preferably able to use PETREL), experience in 3D seismic interpretation and drilling operations (geo-steering) is desirable.
• Able to work effectively as part of a dynamic, high-performing, multi-discipline team.
• Able to effectively communicate across all levels of the interfacing departments and to senior management.
• A proven ability to apply innovative and cost-effective ways of working is expected.
Minimum Qualifications and experience required
• A degree in Geology or equivalent.
• Minimum of 8 years of experience in 3D seismic interpretation.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
PRODUCTION SEISMOLOGIST (Code : DHTC-01-08)
Purpose of Job
To carry out integrated seismic interpretation studies (including contributions to special geophysical and geological review studies) and to provide seismic support within a multi-disciplinary team environment to the appraisal, development and reservoir management. The position covers a broad range of responsibilities aimed at optimising the value of the water injection scheme.
Principle Accountabilities
• Identification, quantification and optimisation of secondary recovery (water injection) opportunities in a mature area.
• Planning and timely execution of multidisciplinary geological studies carried out to a high standards. This includes involvement in the delivery of well proposals, well resumes and drilling activities.
• Initiation of and contribution to special geophysical studies together with the geophysical section.
• Involved in the Company s Static Reservoir Model Review Panel.
• Contribution to well proposals and monitoring during drilling operations as well as the updating of geological/geophysical models after drilling.
• Identification of requirements for data gathering and (integrated) study work to pursue above opportunities.
• Provide input and advice for operational activities and to well planning and well evaluations.
• Mentoring & developing young Brunei staff will be an integral part of job.
Skill/Competence
• Other seismic software skills (e.g. Landmark, 123DI, Spirit II, 3D Volume Interpretation Tools) are essential as well as familiarity with the latest developments in Qualitative Interpretation and re-processing.
• Petrel skills, particularly for structural modelling are highly desirable.
• Previous work experience in mature field areas, preferentially characterised by water injection schemes, would also be an advantage.
• A proven ability to apply innovative and cost-effective ways of working is expected.
Minimum Qualifications and experience required
• A degree in Geoscience or equivalent.
• Minimum of 8 years of experience in 3D seismic interpretation.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
WELL ENGINEER DESIGN (Code : DTHC-08-08)
Purpose of Job
• To support the Asset teams with activities related to Field Development Plans and development of Well Data Packs.
• Work in multi-disciplined teams with Geologists, Reservoir Engineers and Production Technologists on field development studies.
• Introducing new/novel technology into the well delivery process with the main objective of reducing technical cost.
• Has a responsibility to provide input into the Asset Reference Plan.
• BSP has existing, challenging projects ahead including ERD wells, Smart completions, Complex trajectories, managed pressure drilling, Casing drilling, Expandables, etc.
Principle Accountabilities
Health, Safety and Environment (HSE)
• Ensures full compliance with the BSP HSE policies and procedures, HSE Standards and all other appropriate HSE documentation.
• Conduct relevant HSE-Critical activities.
• Sets a clear leadership example and promotes a high degree of HSE awareness among subordinates.
• Reviews effectiveness of rig HSE management.
• Provides input to the Well Engineering HSE Plan and is accountable for follow-up and documented close-out of individual and subordinates action points identified in plan.
Upfront Well Planning
• Strives for full adherence to the Company Well Delivery Process description and the associated time line.
• Assists in Field Development Planning work (Well engineering input) for development projects.
• Prepares departmental input for well proposals and ensures that the well proposals are optimised with respect to well quality, HSE and cost efficiency, through Unit Cost Challenge sessions and Shared Objective Workshops.
• Designs wells (conceptual designs), generates cost estimates Level 1 & 2. and manages the generation of activity proposals.
• Prepares proposed activities in full compliance with Company procedures, policies and guidelines.
• Initiates and implements new techniques to improve performance and actively pursues input from the technology section.
Field Development Planning and Technology Support
• Participates in feasibility studies, to identify projects, which meet companies screening criteria.
• For those studies which meet the criteria deliver well engineering input in to the FDP.
• Responsible for selecting new and novel ideas with the view to introduction into the Company s operations.
• Co-ordinate/liaise with the service industry on new developments, introducing field trials into operations as appropriate.
• Responsible for identifying new technology opportunities with the potential for breakthrough performance in the Company s.
• Continuously update knowledge of new technologies and developments by attending appropriate courses, seminars, workshops and conferences.
Contract Management
• Ensures continuity in contractual coverage for well engineering equipment, material and services normally covered under the contracts.
• Ensures contract expenditure is monitored along with other Key Performance Indicators (KPI).
• Identifies the need for contract variations for equipment, materials and services not covered under the contract, initiates variations and ensures variations are timely in place.
Management of Costs
• Responsible for compilation and submission of Cost Estimates for the activity proposals, using the approved procedures and formats (software).
• Verifies all available cost data for inclusion in cost estimates to ensure required accuracy is achieved.
• Liaise with Business Planning & Economics and sub-surface team on the economic viability of a well.
New Technology
• Where applicable review and introduce new technology into the Asset.
• Make use of global lateral learning through wells global network and import best practice.
• Will be appointed with introducing new technology into the well delivery process with the main objective to reduce UTC.
• Promotes performance of Well Engineering department within the Company and globally.
Staff Development, Mentorship
• Mentors and supports selected young graduate staff with a view to assist them in developing into mature, balanced, assertive and motivated engineers.
• Develops individual Performance Records, including target setting and review and compiles annual performance review reports.
• Develops individual development plans and represents them in the annual performance and potential review cycle.
• Advises, instructs, guides and motivates subordinate staff in the efficient performance of their duties.
• Ensures that meaningful Performance Records are written and review takes place for all subordinates.
Networking
• Maintains regular contact with Well Delivery Team, drilling contractor and service company representatives to ensure mutual understanding of latest operational capabilities and opportunities, which could be implemented in projects, as well as to identify opportunities for quality improvements.
• Maintains regular contact with other Asset Teams, both within and outside the assigned Asset Unit.
• Maintains an international network of contacts, to pass on learning and to keep abreast of the latest developments in new technologies and best practices.
• Updates local and global learning databases with experienced gained.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course.
• Good interpersonal relations and communication skills as well as good working knowledge of well engineering software packages are also required.
• Able to work in teams while maintaining the capability and flexibility for independent action.
• Selected candidates will be encouraged to follow the Shell Group “Round 2” Distance Learning Programme with the aim of obtaining this qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering discipline.
• Minimum 8 years Well Engineering experience of which at least 2 years as Drilling Supervisor (DSV) and 2 years as Well Operations Engineer.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
Please send me the relevant Cvs before 10th September 2008. Please feel free to contact me for further details.
Ravi Bhaskaran
General Manager
Serikandi Oil Field Services
Block-4,9-B Industrial Complex
Kuala Belait - KA 1931
Brunei Darussalam
Hand Phone : +673-8-878765
Tel : +673-3341434, 3347357 – 58
Fax :+673-3-333286
E-mail : ravi@serikandi.com
Web : www.serikandi.com
WELL ENGINEER OPERATIONS (Code: DTHC-07-08)
Purpose of Job
• To provide detailed planning and programming of drilling, completion and workover activities to deliver “fit for purpose” wells at maximum value in terms of cost versus benefits, which meet the requirements of the Development and/or Exploration function while adhering to Company s policies, procedures and guidelines on well delivery operations.
• To implement the “Delivering The Limit (DTL)” methodology. Organise and facilitate challenge sessions DWOP s and AAR s for their projects and act as operations engineer through execution phase on some projects, for which the "cradle to grave" principle can be applied.
• Maintain and monitor the companies lessons learned database and ensure transfer of knowledge across the rig teams.
• Identify opportunities to implement cost saving / value enhancing breakthrough performance in designs with application of radical techniques.
• Make use of global lateral learning through wells global network and import best practice.
• To ensure Company s HSE objectives are met.
Principle Accountabilities
Health, Safety and Environment (HSE)
• Ensures full compliance with the company s HSE policies and procedures as detailed in the Safety Management System, HSE Standards and all other appropriate HSE documentation.
• Conduct relevant HSE-Critical activities as specified in the HSE-Critical Activities Register.
• Set a clear leadership example and promotes a high degree of health, safety and environmental awareness among subordinates.
• Review effectiveness of rig HSE management by line inspection. Provides input to the department HSE Plan and is accountable for follow-up and documentation of close-out of individual and subordinates action points, identified in the HSE plan.
• Fully brief well-site personnel prior to safety critical / non-routine activities such as CPRA and well testing.
• Co-ordinate the follow-up and close-out of rig related action points resulting from near miss and incident reports and HSE visits and audits.
• Encourage well site staff in hazard awareness and risk assessment, generation of hazard-, near miss- and incident reports, by continuous attention and communication.
Well Planning & Execution of Operations
• Strive for full adherence to the Company Well Delivery Process description and the associated time line.
• Prepare departmental input for well proposals and ensures well proposals are optimised with respect to well quality, HSE and cost efficiency.
• Design wells and manages the generation of fit for purpose well programmes.
• Maintain close liaison with the Material Scheduler to ensure forward planning for all non-standard direct charge material requirements ascertained from preparation of well proposals and/or well programmes.
• Supervise and direct well-site personnel in the execution of the ongoing and planned well operations.
• Plan and execute all well operations in full compliance with Company procedures, policies and guidelines.
• Provide timely and accurate information to other departmental units on operational status and any deviations from plans, programmes, policies, procedures or guidelines.
• Facilitate short term planning and scheduling of personnel, equipment and services required for the well operations under his control. Ensures update of well files such as operations progress, writing of end of well reports and reporting / documentation of non-standard or irregular operations and events.
Concurrent Production and Rig Activities (CPRA)
• Manage CPRA involving the rig for which he is responsible.
• Ensure that the platform specific CPRA Safety Case has been issued and the requirements have been implemented prior to starting CPRA.
• Ensure full compliance with CPRA procedures for the duration of CPRA. Monitors co-ownership production deferment booked against CPRA activities.
Well Tie-In
• Manage well tie-in involving the rig for which he is responsible.
• Ensure that the all approvals have been obtained and that adequate procedures and documentation is available on the rig prior to prior to starting well tie-in.
• Liaise with Engineering and Construction departments in matters involving preparation for and execution of well tie-in activities.
Rig Move and Platform Access
• Schedule and attend rig move meetings and liaises with other departments during the preparation of the actual rig move.
• Ensure rig move, involving the rig are planned and discussed with all parties prior to execution of rig move operations.
• Verify and ensure well integrity in line with the company s procedures prior to performing any heavy lifts and/or approaching a platform/well jacket with his rig.
• Ensure platform/well jacket is handed over in accordance with procedures.
Management of Costs
• Review contents of the well proposal and challenges all aspects where alternative more cost effective solutions are available to meet the technical demands and requirements of the well objectives.
• Compilation and submission of the Level 3 and Value of Work Done (VOWD) Cost Estimates using the approved procedures and formats (software).
• Challenge and verifies all available cost data for inclusion in cost estimates to ensure required accuracy is achieved. Monitors and challenges the reported daily cost using the approved cost reporting facilities.
• Monitor the accumulating well cost versus the planned cost, reporting all variances to the departmental units as appropriate.
• Prepares any programme amendment costings as required and ensures necessary approvals are obtained.
Close Out, Reporting & Performance Monitoring
• Ensure the Drilling Supervisor prepares end of the well reports in the approved format.
• Provide feedback to other departmental units on the use and recommendations for improvement of the software programmes in place.
• Provide feedback to the contracts section on the use and recommendations for improvement of the drilling rig and drilling service contracts.
• Provide input for the monthly MIR and quarterly review reports. Ensures all data derived from the wellsite operations is validated.
• Perform cost performance analysis as required and documents all operations where, technically feasible, more cost effective solutions exist.
• Ensure dissemination of the performance analysis by inclusion in the relevant section of the end of well report.
• Closely monitor all incidents of Non-Productive Time (NPT), ensures full and proper reporting of all incidence of NPT in WIS and end of well reports and reviews to capture cost implications and learning points.
• Maintain regular contact with drilling contractor and service company representatives to ensure mutual understanding of operational requirements as well as to identify opportunities for quality improvements.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course.
• Good interpersonal relations and communication skills as well as good working knowledge of well engineering software packages are also required.
• Able to work in teams while maintaining the capability and flexibility for independent action.
• Selected candidates will be encouraged to follow the Shell Group “Round 2” Distance Learning Programme with the aim of obtaining this qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering discipline.
• Minimum 8 years Well Engineering experience of which at least 2 years as Drilling Supervisor.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
DRILLING SUPERVISOR (Code : DTHC-06-08)
Purpose of Job
• The Drilling Supervisor is responsible for the day-to-day on Site planning and execution of drilling, completion and workover activities, maintaining maximum Health, Safety and Environment (HSE) and operational efficiency, at maximum value in terms of cost versus benefits.
• Responsible for implementation of all the company s policies, procedures and guidelines on drilling operations, safety and environmental protection.
• Representative on Site and is responsible for first line response and problem solving of non planned operations.
• Provides guidance and advice to Well-site Drilling Engineers and Assistant Drilling Supervisors and takes an active role in their training and development.
Principle Accountabilities
• Supervise the execution of drilling, completion and workover activities.
• Supervise the drilling contractors and service personnel to ensure all work performed conform to safety, quality and highest value requirements and in accordance with the well programme.
• Responsible for day-to-day optimisation of activities and provision of first line action and problem solving in case of unexpected events.
• Provide sufficient, accurate and timely data to office based Well Delivery Team members.
• Co-ordinate the timely supply of required equipment, consumables and specialist services to ensure uninterrupted continuation of operations.
• In order to broaden his experience and develop his communication skills, he may be assigned to high profile drilling activities such as HPHT and or Deep Water Exploration Drilling.
Health, Safety and Environment (HSE)
• Ensure full Well-site compliance with the Company HSE policies and standards.
• Conduct relevant HSE-Critical activities.
• Ensure all personnel are fully conversant with, and strictly adhere to, their responsibilities as detailed in the Safety Case for the respective installation.
• Set a clear leadership example and promotes a high degree of HSE awareness among subordinates.
• Review effectiveness of rig HSE systems by inspection and audit. Reviews effectiveness of rig HSE communication by line inspection.
• Promote the practical implementation of the Hazard and Effects Management Process (HEMP).
• Fulfill tasks identified in the departmental HSE Plan.
• Co-ordinate activities on the rig affecting HSE matters.
• Ensure all non-routine hazardous work is performed under the permit to work (PTW) system.
• Ensure all near miss incidents and incidents resulting in injury or damage to assets, equipment or the environment are reported and that assigned incidents and near miss events are investigated, reported and documented.
• Shall be certified PTW Authorised Signatory.
Emergency Response
• Co-ordinate the Company s response at the Site and as On-Scene Representative to assists the Drilling Contractor in his function as On-Scene Commander in dealing with an emergency.
• Is fully conversant with Company and Contractor Emergency Response Procedures and ensures the rig and Contractor is fully prepared for an emergency.
• Test rig site emergency preparedness at regular intervals. Shall have attended the Company On-Scene Commander course and be assessed competent, within 6 months of assuming the function.
Concurrent Production and Rig Activities (CPRA)
• Is familiar with Concurrent Production and Rig Activity (CPRA) procedures (TMS-4) and the platform specific CPRA Safety Case and ensures that all operations are performed in full compliance with these procedures.
• Supervise non Well Engineering staff and contractors in execution of CPRA Third Activities.
• Take a pro-active role in the preparation and execution of CPRA activities and ensures the weekly CPRA.
Personnel
• Promote an atmosphere of mutual trust and respect amongst all personnel onboard the work unit or at the drilling site.
• Provide active support to Well-site Drilling Engineers in their development efforts, in particular in preparation for their professional certification examinations.
• Train new Well-site Drilling Engineers in their prime roles and responsibilities, in particular logistics management, filing and reporting. Participates in staff appraisal exercises.
Reporting of daily operations
• Report directly to the Well Delivery Team but functionally reports to the Senior Drilling Engineer on all matters pertaining to the conduct of operations at the Well-site in accordance with the requirements of the Well Engineering Manual.
• Input and verifies the accuracy of Well Information System (WIS) daily drilling reports.
• Responsible for processing end of well reports, as per Well Engineering Manual standards, for selected wells.
Contract management
• Responsible for the implementation of all relevant contracts and their variations.
• Responsible for the monitoring and reporting of contractor service quality.
• Inform contract holders of all service provision deficiencies and contractor non-compliance.
Personal Development
• Maintain an active interest in and familiarizes with operations.
• Is present during the Drilling the Well on Paper (DWOP) and other meetings taking place as part of the activity planning process.
• Maintains the Skills Portfolio Logbook up to date.
• Performs small office based projects in well engineering subjects during time off.
Management of costs
• Responsible for the daily expenditure and reporting using cost reporting facility.
• Calculate the cost of services execution based on the job execution record and contract rates.
• Minimise equipment rental time and personnel on board by the timely and efficient transfer of materials and personnel to and from the rig.
• Has full authority for call out of equipment and personnel.
Close out, reporting and performance monitoring
• Provide data, assists in the preparation of, and conducts well review presentations.
• Ensure well file is kept up to date.
• Provide recommendations for improvement of the WIS and cost reporting system, the accounts guide / coding system and drilling rig / drilling service contracts.
• Assist in longer term operational decision making, performs cost benefit analysis on all programmed operational steps to ensure cost efficient operation, suggests alternative procedures when appropriate cost benefits are perceived.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course.
• Good interpersonal relations and communication skills as well as good working knowledge of well engineering software packages are also required.
• Able to work in teams while maintaining the capability and flexibility for independent action.
• Selected candidates will be encouraged to follow the Shell Group “Round 2” Distance Learning Programme with the aim of obtaining this qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering discipline.
• Minimum 8 years Well Engineering experience of which at least 2 years as Drilling Supervisor.
Remark
Work Schedule – Standard work pattern or 28 by 28 rotation.
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
RESERVOIR ENGINEER (Code : DTHC-05-08)
Purpose of Job
To provide reservoir engineering contribution within a multi-disciplinary team environment to the appraisal, development and reservoir management of the fields. The job covers a broad range of responsibilities including carrying out reservoir studies with the objectives of optimising Asset performance and maximising economic hydrocarbon recovery of the fields.
Principle Accountabilities
• Identify and quantify opportunities for appraisal, development, production optimisation and utilisation of new technologies and tools. The work may include integrated development studies utilising detailed integrated reservoir simulation studies and economic evaluations.
• Implement approved appraisal / development plans, and production policies.
• Surveillance and optimisation of existing developments viz. Identification of data gathering requirements, and providing input and advice for operational activities (e.g. logging, testing) and to well operations planning and well evaluations.
• Ensure that reservoir engineering data and documentation pertaining to the allocated reservoirs are validated and stored in a retrievable manner.
• Support and contribute to the Hydrocarbon resource volume and production forecasting administration, and annual Business Plan processes.
• Liaison with the shareholders to ensure timely value assurance, budget approvals and performance reporting.
• Participate in peer assists both within Company and regionally (VtV, VARs).
• Coaching, mentoring & developing local Bruneian staff will be an integral part of the job.
Skill/Competence
• Experience in mature field management and secondary recovery processes.
• Experience with Exploration/Appraisal support.
• Broad experience in analytical and reservoir simulation modelling (1D to 3D).
• Have completed all basic Core Discipline training (Reservoir Engineering).
Minimum Qualifications and experience required
• A degree in Petroleum/Chemical Engineering degree or any other engineering/science degree.
• Minimum of 8 years of Reservoir Engineering, including well-site drilling and logging / well testing operations experience.
• Broad experience in various logging technology and petrophysical interpretation technique, including open hole, cased hole and core-log evaluation.
• Experienced in Petrophysics data management and integration.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
PRODUCTION TECHNOLOGIST (Code : DTHC-04-08)
Purpose of Job
To provide comprehensive Production Technology expertise to the subsurface study team in a Petroleum Engineering organisation.
Principle Accountabilities
• Provide production technology input into the study team to ensure project value is maximised.
• Perform studies covering but not limited to sand management, smart well deployment, completion and stimulation design.
• Implement fit-for-purpose technologies to maximise project value.
• Lead a project through the well delivery process.
• Provide Production Technology input in VARs, RtLs and peer assists, as required.
• Coaching, mentoring & developing local Bruneian staff will be an integral part of the job.
Skill/Competence
• A good team player with track record in conducting Production Technology studies. Experience in oil rim development and gas cap blowdown studies would be an advantage.
• Excellent inter-personal and team skills. Experience working in a multi-discipline and/or multi-cultural team would be advantage.
• A proven ability to apply innovative and cost-effective ways of working is expected.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering discipline.
• Minimum of 8 years in Production technology experience with field development planning experience.
• Proficient in the use of the following tools; Prosper, IPM, Welcat. Experience in PWRI-frac, FIST, STIM2001 and Shellfrac would be an advantage.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
PETROPHYSICS ENGINEER (Code : DHTC-03-08)
Purpose of Job
To provide petrophysical engineering support within a multi-disciplinary team environment to the appraisal, development, reservoir studies and management of the assets within the Company s Asset Units.
Principle Accountabilities
• Review and analyse all available petrophysical data of his area of studies, enhance and validate petrophysical interpretation in order to optimise use and integration of data in the construction of static and dynamic reservoir models.
• Provide correct integration of petrophysical information, understanding and requirements into development plans and activity proposals.
• Translate well objectives and business requirements into fit-for-purpose, cost effective data acquisition strategy and programs.
• Provide operational input and support to well and reservoir surveillance activities, e.g. well reviews, cased hole data acquisition for reservoir monitoring, well engineering operations planning and support, including well-site operations where necessary.
• Co-ordinate and QA/QC petrophysical log and core data acquisition activities, and provide operational petrophysical support and evaluation of new data acquired.
• Ensure the integrity of the corporate log database.
• Keep up to date with new technology developments within the discipline and acquire other Petroleum Engineering disciplines basic knowledge to allow an active participation in multidisciplinary groups.
• Coaching, mentoring & developing local Bruneian staff will be an integral part of the job.
Skill/Competence
• Petrophysics – Skill.
• Geophysics (+quantitative interpretation) – Knowledge.
• Geology – Knowledge.
• Reservoir engineering – Knowledge.
• A proven ability to apply innovative and cost-effective ways of working is expected.
Minimum Qualifications and experience required
• A degree in Petroleum/Chemical Engineering degree or any other engineering/science degree.
• Minimum of 8 years of experience in petrophysical and subsurface engineering, including well-site operations experience/exposure.
• Broad experience in various logging technology and petrophysical interpretation technique, including open hole, cased hole and core-log evaluation.
• Experienced in Petrophysics data management and integration.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
PRODUCTION GEOLOGIST (Code : DHTC-02-08)
Purpose of Job
To provide comprehensive production and reservoir geology input within a multi-disciplinary team environment intoa full field development studies with primary focus on maturing water flood opportunities.
Principle Accountabilities
• Work in close collaboration with multi-disciplinary team consisting of production geophysicists & geologist, reservoir engineers, production Technologists, Petrophysicist, well engineers and front-end facilities engineers supported by technical assistants, study team leader and the development leadership team to define the work scope.
• Contribute to the planning and scheduling of study project and on the key milestones such as reviews/challenge sessions, VARs, reserves booking and reporting. Familiarity of the OPMG, V2V and the VAR process is an advantage.
• Participate in internal and external reviews as well as audits on studies and resource volumes, VARs- Perform basic data collection for the study, QC and validation.
• Identify, quantify and optimise secondary recovery (water injection) opportunities in a mature area. The work will include detailed integrated reservoir geological modelling.
• Carry out all required evaluations prior to the start of 3D static modelling.
• Identify and assess risks and uncertainties, apply multiple scenarios approach in the field development planning study leading to the maturing of the development concept.
• Contribute to the field development plan documentation.
• Provide support to the 3D seismic interpretation as required.
• Firm up further oil development and water injection drilling targets, prepare the well data packs and monitor the drilling activities.
• Provide input and advice for operational activities (e.g. well proposals, logging, testing) and well planning and evaluations.
• Mentoring & developing young Bruneian staff will be an integral part of the job.
Skill/Competence
• Previous experience on water injection projects is highly desirable.
• Experience with static reservoir modelling is a must (preferably able to use PETREL), experience in 3D seismic interpretation and drilling operations (geo-steering) is desirable.
• Able to work effectively as part of a dynamic, high-performing, multi-discipline team.
• Able to effectively communicate across all levels of the interfacing departments and to senior management.
• A proven ability to apply innovative and cost-effective ways of working is expected.
Minimum Qualifications and experience required
• A degree in Geology or equivalent.
• Minimum of 8 years of experience in 3D seismic interpretation.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
PRODUCTION SEISMOLOGIST (Code : DHTC-01-08)
Purpose of Job
To carry out integrated seismic interpretation studies (including contributions to special geophysical and geological review studies) and to provide seismic support within a multi-disciplinary team environment to the appraisal, development and reservoir management. The position covers a broad range of responsibilities aimed at optimising the value of the water injection scheme.
Principle Accountabilities
• Identification, quantification and optimisation of secondary recovery (water injection) opportunities in a mature area.
• Planning and timely execution of multidisciplinary geological studies carried out to a high standards. This includes involvement in the delivery of well proposals, well resumes and drilling activities.
• Initiation of and contribution to special geophysical studies together with the geophysical section.
• Involved in the Company s Static Reservoir Model Review Panel.
• Contribution to well proposals and monitoring during drilling operations as well as the updating of geological/geophysical models after drilling.
• Identification of requirements for data gathering and (integrated) study work to pursue above opportunities.
• Provide input and advice for operational activities and to well planning and well evaluations.
• Mentoring & developing young Brunei staff will be an integral part of job.
Skill/Competence
• Other seismic software skills (e.g. Landmark, 123DI, Spirit II, 3D Volume Interpretation Tools) are essential as well as familiarity with the latest developments in Qualitative Interpretation and re-processing.
• Petrel skills, particularly for structural modelling are highly desirable.
• Previous work experience in mature field areas, preferentially characterised by water injection schemes, would also be an advantage.
• A proven ability to apply innovative and cost-effective ways of working is expected.
Minimum Qualifications and experience required
• A degree in Geoscience or equivalent.
• Minimum of 8 years of experience in 3D seismic interpretation.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
WELL ENGINEER DESIGN (Code : DTHC-08-08)
Purpose of Job
• To support the Asset teams with activities related to Field Development Plans and development of Well Data Packs.
• Work in multi-disciplined teams with Geologists, Reservoir Engineers and Production Technologists on field development studies.
• Introducing new/novel technology into the well delivery process with the main objective of reducing technical cost.
• Has a responsibility to provide input into the Asset Reference Plan.
• BSP has existing, challenging projects ahead including ERD wells, Smart completions, Complex trajectories, managed pressure drilling, Casing drilling, Expandables, etc.
Principle Accountabilities
Health, Safety and Environment (HSE)
• Ensures full compliance with the BSP HSE policies and procedures, HSE Standards and all other appropriate HSE documentation.
• Conduct relevant HSE-Critical activities.
• Sets a clear leadership example and promotes a high degree of HSE awareness among subordinates.
• Reviews effectiveness of rig HSE management.
• Provides input to the Well Engineering HSE Plan and is accountable for follow-up and documented close-out of individual and subordinates action points identified in plan.
Upfront Well Planning
• Strives for full adherence to the Company Well Delivery Process description and the associated time line.
• Assists in Field Development Planning work (Well engineering input) for development projects.
• Prepares departmental input for well proposals and ensures that the well proposals are optimised with respect to well quality, HSE and cost efficiency, through Unit Cost Challenge sessions and Shared Objective Workshops.
• Designs wells (conceptual designs), generates cost estimates Level 1 & 2. and manages the generation of activity proposals.
• Prepares proposed activities in full compliance with Company procedures, policies and guidelines.
• Initiates and implements new techniques to improve performance and actively pursues input from the technology section.
Field Development Planning and Technology Support
• Participates in feasibility studies, to identify projects, which meet companies screening criteria.
• For those studies which meet the criteria deliver well engineering input in to the FDP.
• Responsible for selecting new and novel ideas with the view to introduction into the Company s operations.
• Co-ordinate/liaise with the service industry on new developments, introducing field trials into operations as appropriate.
• Responsible for identifying new technology opportunities with the potential for breakthrough performance in the Company s.
• Continuously update knowledge of new technologies and developments by attending appropriate courses, seminars, workshops and conferences.
Contract Management
• Ensures continuity in contractual coverage for well engineering equipment, material and services normally covered under the contracts.
• Ensures contract expenditure is monitored along with other Key Performance Indicators (KPI).
• Identifies the need for contract variations for equipment, materials and services not covered under the contract, initiates variations and ensures variations are timely in place.
Management of Costs
• Responsible for compilation and submission of Cost Estimates for the activity proposals, using the approved procedures and formats (software).
• Verifies all available cost data for inclusion in cost estimates to ensure required accuracy is achieved.
• Liaise with Business Planning & Economics and sub-surface team on the economic viability of a well.
New Technology
• Where applicable review and introduce new technology into the Asset.
• Make use of global lateral learning through wells global network and import best practice.
• Will be appointed with introducing new technology into the well delivery process with the main objective to reduce UTC.
• Promotes performance of Well Engineering department within the Company and globally.
Staff Development, Mentorship
• Mentors and supports selected young graduate staff with a view to assist them in developing into mature, balanced, assertive and motivated engineers.
• Develops individual Performance Records, including target setting and review and compiles annual performance review reports.
• Develops individual development plans and represents them in the annual performance and potential review cycle.
• Advises, instructs, guides and motivates subordinate staff in the efficient performance of their duties.
• Ensures that meaningful Performance Records are written and review takes place for all subordinates.
Networking
• Maintains regular contact with Well Delivery Team, drilling contractor and service company representatives to ensure mutual understanding of latest operational capabilities and opportunities, which could be implemented in projects, as well as to identify opportunities for quality improvements.
• Maintains regular contact with other Asset Teams, both within and outside the assigned Asset Unit.
• Maintains an international network of contacts, to pass on learning and to keep abreast of the latest developments in new technologies and best practices.
• Updates local and global learning databases with experienced gained.
Skill/Competence
• Possession of a valid IWCF certificate at combined surface and sub-sea supervisor level.
• Attendance of relevant Advanced Drilling Techniques course.
• Good interpersonal relations and communication skills as well as good working knowledge of well engineering software packages are also required.
• Able to work in teams while maintaining the capability and flexibility for independent action.
• Selected candidates will be encouraged to follow the Shell Group “Round 2” Distance Learning Programme with the aim of obtaining this qualification within two years.
Minimum Qualifications and experience required
• A university degree in Engineering or any other related engineering discipline.
• Minimum 8 years Well Engineering experience of which at least 2 years as Drilling Supervisor (DSV) and 2 years as Well Operations Engineer.
Remark
Please mention the following in your covering letter:
Your Present Salary.
Your Expected Salary.
Your Notice Period.
Please send me the relevant Cvs before 10th September 2008. Please feel free to contact me for further details.
Ravi Bhaskaran
General Manager
Serikandi Oil Field Services
Block-4,9-B Industrial Complex
Kuala Belait - KA 1931
Brunei Darussalam
Hand Phone : +673-8-878765
Tel : +673-3341434, 3347357 – 58
Fax :+673-3-333286
E-mail : ravi@serikandi.com
Web : www.serikandi.com
Subscribe to:
Posts (Atom)